Gas Monitors
Manufacturer » Biosystems » BW Technologies » GasTech (Thermo) » RKI Instruments » VIEW ALL
You Are Viewing Fixed Gas Monitors. We Also Have Portable Gas Detectors »
Biosystems Zone Guard
The Biosystems Zone Guard Gas Monitor detects carbon monoxide (CO), hydrogen sulfide (H2S), sulfur dioxide (SO2), chlorine (Cl2), chlorine dioxide (ClO2), phosphine (PH3), and nitrogen dioxide (NO2)from either singly oxygen, combustible or toxic sensor input.
Fixed Gas Detection System
BW Technologies CR-4000
Fully self-contained, the CR-4000 4-channel gas monitor's, 4-20mA, AC/DC controller provides continuous uninterrupted monitoring of toxic gases, combustible and oxygen hazards. The CR-4000 delivers 24 VDC power to any 4-20 mA transmitter. Application-focused, solution-orientated and competitively priced, the CR-4000 will meet your needs today and in the future. Flexibility is built-in for easy adaptation to changing requirements.
Fixed Gas Detection System
BW Technologies GasPoint
The GasPoint transmitter with internal alarm relays provides a 4-20 mA output signal and can be connected to any control system (DCS, PLC or controller). With advanced sensor technology and microprocessor-based operation, GasPoint provides continuous monitoring for H2S, CO or combustibles.
Fixed Gas Detection System
BW Technologies RRJ Series
The rugged RRJ Series Gas Detection Transmitters provide zero-maintenance H2S or combustibles, they come complete with sensor and provide a 4-20 mA signal that is compatible with any 4-20 mA controller, DCS or PLC.
Fixed Gas Detection System
RKI Instruments Beacon 110
The RKI Instruments, Beacon 110: A powerful, low cost fixed system controller for one point of gas detection. Featuring microprocessor control, versatile, simple to install and operate, and priced to be the industry's best value single gas detection controller.
Fixed Gas Detection System
RKI Instruments Beacon 200
The Beacon 200 from RKI Instruments is a powerful, low cost fixed system controller for two points of gas detection. Microprocessor controlled, versatile, and simple to install & operate. Priced to be the industry's most economical two point controller; The Beacon 200 is capable of connecting directly to RKI sensors for combustible levels (LEL), Carbon Monoxide (CO), Hydrogen Sulfide (H2S) and Oxygen (O2).
Fixed Gas Detection System
RKI Instruments Beacon 800
Microprocessor controlled and capable of accepting up to 8 separate 4-20 mA sensor transmitters; Either 2 or 3 wire. The RKI Beacon 800, with power supplied by either 24 VDC or 115 VAC, is simple to operate and comes complete with a wall mount installation kit.
Fixed Gas Detection System
RKI Instruments Beacon 410
A highly configurable, microprocessor-based, flexible and easy to use 4 channel gas monitor that simultaneously displays the gas type, readings, and status for 4 channels of gas detection. Able to monitor any combination of direct connect sensors (LEL combustibles, Oxygen, Hydrogen Sulfide, Carbon Monoxide, and Carbon Dioxide) as well as any 4-20mA transmitters.
Fixed Gas Detection System
RKI Instruments M2 Series
The RKI M2 from RKI Instruments, is a state-of-the-art Stand Alone transmitter that can operate as an independent system or as part of a system connected to analog, digital signal, or to virtually any controller, PLC, or DCS. The M2 series detects LEL combustibles, oxygen, hydrogen sulfide, or carbon monoxide.
Fixed Gas Detection System
RKI Instruments M-Series Low Cost
From RKI Instruments, this low cost CO or H2S transmitter assembly is highly reliable and very cost effective. The M-Series is a basic 4-20 mA transmitter for the detection of carbon monoxide and hydrogen sulfide. The electronics are protected inside a plastic enclosure to avoid damage from mechanical abuse, water, dust or corrosion. A 2 to 3 year sensor life is typical for this H2S and CO monitor.
Fixed Gas Detection System
RKI Instruments Direct Connect Sensors
Highly reliable and very cost effective for the detection of common gas hazards. Available for LEL, H2 Specific LEL, Oxygen, H2S, and CO. RKI Direct Connect sensors are explosion-proof with flame arrestors, and approved (optional non-explosion proof version available for oxygen for use in hazardous atmospheres).
Fixed Gas Detection System
RKI Instruments S-Series Diffusion
Highly reliable and very cost effective basic 4-20 mA transmitters for detection of common gas hazards. The "S" Series transmitters are available for LEL, Oxygen, H2S, CO, or for 0 - 500 ppm Hydrocarbon detection (for various fuels or solvents).
Fixed Gas Detection System
RKI Instruments PS2 Single Point Stand Alone
The perfect low cost solution for hydrogen detection in battery rooms, or for LEL or PPM level detection of a variety of flammable or solvent vapors in general industry. The Model PS 2 is a multipurpose gas monitor utilizing a MOS (metal oxide sensor) for long lasting and low maintenance detection at the LEL or PPM levels of many gases or vapors.
Fixed Gas Detection System
RKI Instruments RI-215 Series IR CO2 Monitors
Widely used in the measurement and control of CO2 levels in a variety of applications where CO2 monitoring or detection is required. A non-dispersive infrared absorption sensor is used to provide direct measurements through diffusion or sample draw monitors, and activate alarms or control ventilation systems based on preset CO2 levels.
Fixed Gas Detection System
RKI Instruments OX500 Indoor Stand Alone
The OX-500 Oxygen Monitor from RKI Instruments: A compact, diffusion style wall mount Oxygen detector designed to prevent Oxygen deficient accidents. The RKI OX-500 features a 3 color LED digital display, remote sensor capability and stores alarm summary data.
Fixed Gas Detection System
RKI Instruments 35-3000 Series Sample Draw Detector
From RKI Instruments, the 35-3000RK Series: A compact sample draw detector assembly with a built-in pump that accepts a 24VDC input. Featuring a NEMA4X enclosure, making it dust, water and corrosion resistant. RKI offers a Multi gas version with up to four sensors, LEL, O2, H2S and CO all in one enclosure!
Fixed Gas Detection System
RKI Instruments GD-K8A Diffusion Sensor/Transmitter
A diffusion style head ideally suited to meet your gas detection needs. Twenty one sensors are available for use in this model.
Fixed Gas Detection System
RKI Instruments GD-K7D2 Sample Drawing Sensor/Transmitter for Toxic Gases
RKI's workhorse sample draw assembly, for use with a wide variety of electrochemical sensors for toxic gas detection. Designed for simple servicing in that the sensor and pump can be easily replaced in less than one minute each.
Fixed Gas Detection System
RKI Instruments GD-K77D Sample Drawing Sensor Transmitter
This complete sample draw gas detector includes digital readout and alarm relays. New gas sensor technology utilizing intelligent sensor technology for remote location calibration and setup.
Fixed Gas Detection System
RKI Instruments FP-260
RKI Instruments, FP-260 offers PPB or PPM detection with a digital display. The unit is highly sensitive and is ideal for monitoring clean rooms in the semiconductor industry.
Paper Tape Gas Detection System
RKI Instruments FP-270
From RKI Instruments, the FP-270 features high sensitivity detection for C5F8 (Octafluorocyclopentane) with a special built-in Pyrolyzer. Easy to replace cassette tape plug-in and interference free detection against Fluorinert and Galden.
Paper Tape Gas Detection System
RKI Instruments FP-300
The FP-300 features high sensitivity toxic gas detection monitoring for semiconductor fabs and exhaust gases from manufacturing tools and scrubbers. Utilization of Photoelectric Photometry in a compact package make this unit the worlds smallest detector of its kind.
Paper Tape Gas Detection System
RKI Instruments Photoelectron Spectroscopy
From RKI Instruments, the Model AC-2: An instrument for Photoelectron Spectroscopy at atmospheric pressure, an open counter equipped with a UV source.
Bench-top Photoelectron Spectroscopy Detector
Thermo Scientific Safe T Net 100
The GasTech SafeTNet 100 from Thermo Scientific: An internally amplified controller and detector is a single-channel unit for monitoring combustible gases, toxic gases, or oxygen at a single location.
Fixed Gas Detection System
Thermo Scientific Safe T Net 210
The GasTech Safe T Net 210 is a micro-processor based controller designed to accept one to two combustible, oxygen and/or toxic detector heads. Standard features include: digital readout display, LED alarm indication, 4 to 20 mA output, individual low and high alarm outputs with a common fault alarm relay.
Fixed Gas Detection System
Thermo Scientific Safe T Net 410
The GasTech /Thermo Scientific Safe T Net 410 is a micro-processor based controller designed to accept one to four combustible, oxygen and/or toxic detector heads. Standard features include: digital readout display, LED alarm indication, 4 to 20 mA output, individual low and high alarm outputs with a common fault alarm relay.
Fixed Gas Detection System
Thermo Scientific Safe T Net 2000
The Safe T Net 2000 is microprocessor-based controller designed to accept up to 10 Control Modules and 20 sensor points total. Standard features include, digital readout display, LED alarm indication, 4 to 20 mA output, individual low/high alarms and a common-fault alarm relay.
Fixed Gas Detection System
Thermo Scientific Model 128
The Model 128: A wall mounted gas monitor designed for reliable gas detection, designed to accept one to eight combustible, oxygen and/or toxic detector heads. The Model 128 is a cost-effective solution for warning of unsafe gas levels.
Fixed Gas Detection System
Thermo Scientific FX-IR
The FX-IR transmitter uses dual infrared technology to detect hydrocarbon gases. Dual infrared design provides excellent long-term stability, eliminating the need for frequent calibration and providing additional sensitivity for the harshest environment.
Fixed Gas Detection System
Thermo Scientific FX-SMT
(Intrinsically Safe)
Loaded with industry features, the GasTech FX-SMT Transmitter/Sensor assembly comes standard with non-intrusive calibration, eliminating the need to declassify hazardous areas, a user adjustable "calibration reminder" message, and pre-calibrated sensors for quick plug-in operation.
Fixed Gas Detection System
Thermo Scientific FX-SMTn Transmitter
The GasTech FX-SMTn: A non- intrusive gas detection transmitter designed for use in non-hazardous areas. Comes standard with a user adjustable "calibration reminder" message, and pre-calibrated sensors for quick plug-in operation.
Fixed Gas Detection System
Thermo Scientific Standard Diffusion Gas Transmitter
The GasTech Standard Diffusion Transmitter can be configured for the detection of hydrocarbon gases, ammonia, arsine, carbon monoxide, chlorine, chlorine dioxide, diborane, fluorine, hydrogen chloride, hydrogen cyanide, hydrogen fluoride, hydrogen sulfide, nitric oxide, nitrogen dioxide, oxygen, ozone, phosphine, silane, and sulfur dioxide
Fixed Gas Detection System
Thermo Scientific Sample Draw Transmitter
The GasTech Sample-Draw Transmitter is a single gas detector, allowing users to extract a gas samples from deep shafts, tall ceilings, wells, pits where it is either difficult or impossible to place a standard sensor.
Fixed Gas Detection System
