Gas Regulator - 700 Series
These regulators are a single stage design used for the 2AL,8AL, 6D, 7EOC, 7HP and 5E cylinders. The 700 series regulators are preset to deliver gas at a flow rate specified by the user.The 700 series regulator may be divided into three groups.
Standard flow rates are 0.5LPM, 1.0LPM, and 1.5LPM; however, these regulators may be ordered with a preset flow as low as 0.2LPM, or as high a 6.0LPM. (4LPM is maximum for model 713).
» Click here if you are interested in obtaining a Quote
| Model Number | Maximum Inlet Pressure | Inlet | Outlet | Guage* |
| 713 | 500 psig/35 bar | 20 psig/1.4 bar | 3/16" Barb/4.8 mm | 0-500 psig/35 bar |
| 715 | 1000 psig/70 bar | 60 psig/4.1 bar | 3/16" Barb/4.8 mm | 0-1000 psig/70 bar |
| 718 | 3000 psig/207 bar | 60 psig/4.1 bar | 3/16" Barb/4.8 mm | 0-3000 psig/200 bar |
| Construction | Weight | Notes |
| Body: Brass Seat: Teflon® Piston: Brass Washer: Buna N (713 only) O-Rings: Viton® Bonnet: Nickel Plated Brass |
713: 0.6 lb/0.28 kg 715: 0.5 lb/0.24 kg 718: 0.7 lb/.032 kg |
713: Maximum inlet pressure of 500 psig/35 bar
and an inlet fitting to match the CGA 600 in the 7EOC and
7HP cylinders 715: Maximum inlet pressure of 1000 psig/70 bar and fits the 2AL, 8AL and 6D cylinders 718: Maximum inlet pressure of 3000 psig/207 bar and can be used as an economical single stage regulator for use on 5E and refillable cylinders with CGA fittings |
All regulators are warranted for two years
® registered trademarks of The DuPont Company
* Gauge indicates cylinder pressure in both psig and bar
